Paper
2 November 2011 Design and implementation of a prototype micropositioning and fusion of optical fibers
Fabio Vega, Cesar Torres, Lorenzo Mattos
Author Affiliations +
Abstract
We developed an automated system in micro and optical fiber fusion, using stepper motors of 3.6 ° (1.8 ° Medium step) with a threaded system for displacements in the order of microns, a LM016 LCD for User message management, a PIC16F877A microcontroller to control the prototype. We also used internal modules: TMR0, EEPROM, PWM (pulse width modulation) control using a pulse opto-cupped the discharge circuit high voltage (20 to 35 kilovolt transformer for FLYBACK fusion) The USART (Universal Synchronous Asynchronous Receiver Transmitter) for serial interface with the PC. The software platform developed under Visual Basic 6.0, which lets you manipulate the prototype from the PC. The entire program is optimized for microcontroller interrupt, macro-functions and is written in MPLAB 7.31. The prototype is now finished.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fabio Vega, Cesar Torres, and Lorenzo Mattos "Design and implementation of a prototype micropositioning and fusion of optical fibers", Proc. SPIE 8011, 22nd Congress of the International Commission for Optics: Light for the Development of the World, 80111A (2 November 2011); https://doi.org/10.1117/12.902776
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prototyping

Optical fibers

Transformers

Signal attenuation

Connectors

Microcontrollers

Software development

Back to Top