Co-pumped 130 W monolithic single frequency fiber amplifier with an optically induced thermal gradient

Clint Zeringue; Chris Vergien; Iyad Dajani

doi:10.1117/12.886154

25 May 2011 Co-pumped 130 W monolithic single frequency fiber amplifier with an optically induced thermal gradient

Clint Zeringue, Chris Vergien, Iyad Dajani

Author Affiliations +

Proceedings Volume 8039, Laser Technology for Defense and Security VII; 80390I (2011) https://doi.org/10.1117/12.886154
Event: SPIE Defense, Security, and Sensing, 2011, Orlando, Florida, United States

Abstract

We present theoretical and experimental results of a 130 W continuous-wave (CW), single-frequency, 7 m, polarizationmaintaining (PM) Yb:doped fiber (25/400) μm amplifier simultaneously seeded with a combination of broadband and narrow-line signals. Experiments were performed for two thermal configurations and the SBS threshold of the doubly seeded amplifier is compared to the singly seeded case. In the first configuration, the fiber was wrapped around a cold spool held at 12° C to diminish thermally induced shifts in the acoustic resonance of the fiber, which is known to suppress stimulated Brillouin scattering (SBS). In this case, over 80 W of single-frequency output was obtained demonstrating an enhancement of 3 dB in the SBS threshold compared to the single-tone case whereby the SBS threshold was 40 W. In the second thermal configuration, 6 m of the fiber is wrapped around the same cold spool, but approximately 1 m of the fiber is left to cool in ambient conditions. In this case, an optically induced thermal gradient was formed due to the quantum defect heating associated with power transfer from the pump and broadband seed signals into the single-frequency signal at the output end of the fiber. Over 130 W of single-frequency output was demonstrated yielding an effective increase of ~5 dB in the SBS threshold when compared to the single-tone case.

Citation Download Citation

Clint Zeringue, Chris Vergien, and Iyad Dajani "Co-pumped 130 W monolithic single frequency fiber amplifier with an optically induced thermal gradient", Proc. SPIE 8039, Laser Technology for Defense and Security VII, 80390I (25 May 2011); https://doi.org/10.1117/12.886154

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE