Scanning electron microscopy imaging of ultra-high aspect ratio hole features

Aron J. Cepler; Benjamin Bunday; Bradley L Thiel; John S. Villarrubia

doi:10.1117/12.916552

5 April 2012 Scanning electron microscopy imaging of ultra-high aspect ratio hole features

Aron J. Cepler, Benjamin Bunday, Bradley L Thiel, John S. Villarrubia

Proceedings Volume 8324, Metrology, Inspection, and Process Control for Microlithography XXVI; 83241N (2012) https://doi.org/10.1117/12.916552
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

In-line, non-destructive process control metrology of high aspect ratio (HAR) holes and trenches has long been a known gap in metrology. Imaging the bottoms of at-node size contact holes in oxide with aspect rations beyond 10:1 has not yet been demonstrated. Nevertheless, holes and trenches of 30:1, 40:1, or even 60:1 will soon enter production, with these etches being applied to various homogeneous and multi-layer stacks of Si and SiO2. The need comes from Moore's Law and increasing functional density on microchips, on which true 3D memory devices will soon be manufactured. These can take many different forms, but a common building block will be these ultra-HAR etched features. In this work, we show experimental results and simulations from the NIST JMONSEL program to assess the feasibility of measuring such features using both conventional low voltage scanning electron microscopy (SEM) and higher beam energies and low vacuum conditions to ameliorate charging. In our measurements, higher voltage SEM did not improve upon conventional critical dimension (CD)-SEM. Simulations suggest the reason is a failure to overcome a negative oxide potential. Although a signal can in principle be detected from the bottom of contact holes in typical imaging conditions in the CD-SEM, it is likely that it will be very small and possibly below the noise floor.

Citation Download Citation

Aron J. Cepler, Benjamin Bunday, Bradley L Thiel, and John S. Villarrubia "Scanning electron microscopy imaging of ultra-high aspect ratio hole features", Proc. SPIE 8324, Metrology, Inspection, and Process Control for Microlithography XXVI, 83241N (5 April 2012); https://doi.org/10.1117/12.916552

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available