Paper
26 February 2013 Yb-doped phosphate double-cladding optical fiber for high-power laser applications
E. Mura, G. C. Scarpignato, J. Lousteau, N. G. Boetti, S. Abrate, D. Milanese
Author Affiliations +
Abstract
A Yb-doped phosphate glass double cladding optical fiber was prepared using a custom designed glass composition (P2O5 - Al2O3 - Li2O - B2O3 - BaO - PbO - La2O3) for high-power amplifier and laser applications. The preform drawing method was followed, with the preform being fabricated using the rotational casting technique. This technique, previously developed for tellurite, fluoride or chalcogenide glass preforms is reported for the first time using rare earth doped phosphate glasses. The main challenge was to design an adequate numerical aperture between first and second cladding while maintaining similar thermo-mechanical properties in view of the fiber drawing process. The preform used for the fiber drawing was produced by rod-in-tube technique at a rotation speed of 3000 rpm. The rotational casting technique allowed the manufacturing of an optical fiber featuring high quality interfaces between core and internal cladding and between the internal and external cladding, respectively. Loss attenuation was measured using the cut-back method and lasing was demonstrated at 1022 nm by core pumping with a fiber pigtailed laser diode at the wavelength of 976 nm.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. Mura, G. C. Scarpignato, J. Lousteau, N. G. Boetti, S. Abrate, and D. Milanese "Yb-doped phosphate double-cladding optical fiber for high-power laser applications", Proc. SPIE 8601, Fiber Lasers X: Technology, Systems, and Applications, 860126 (26 February 2013); https://doi.org/10.1117/12.2002059
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Glasses

Fiber lasers

Optical fibers

Refractive index

Interfaces

Signal attenuation

RELATED CONTENT

Er Yb co doped oxy fluoride glass ceramics core polymer...
Proceedings of SPIE (December 16 2014)
Crystal fibers for high power lasers
Proceedings of SPIE (February 26 2013)
Double core optical fibre doped with ytterbium
Proceedings of SPIE (April 09 2007)
Tellurite glasses for optical fibre fabrication
Proceedings of SPIE (June 13 2008)
Tellurite glass fiber fabrication and drawing furnace analysis
Proceedings of SPIE (September 14 2007)

Back to Top