Paper
18 September 2013 Flexible transistor active matrix array with all screen-printed electrodes
Author Affiliations +
Abstract
Flexible transistor active matrix array is fabricated on PEN substrate using all screen-printed gate, source and drain electrodes. Parylene-C and DNTT act as gate dielectric layer and semiconductor, respectively. The transistor possesses high mobility (0.33 cm2V-1 s-1), large on/off ratio (< 106) and low leakage current (~10 pA). Active matrix array consists of 10×10 transistors were demonstrated. Transistors exhibited average mobility of 0.29 cm2V-1s-1 and on/off ratio larger than 104 in array form. In the transistor array, we achieve 75μm channel length and a size of 2 mm × 2 mm for each element in the array which indicates the current screen-printing method has large potential in large-area circuits and display applications.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Boyu Peng, Jiawei Lin, and Paddy K. L. Chan "Flexible transistor active matrix array with all screen-printed electrodes", Proc. SPIE 8831, Organic Field-Effect Transistors XII; and Organic Semiconductors in Sensors and Bioelectronics VI, 883116 (18 September 2013); https://doi.org/10.1117/12.2022621
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transistors

Electrodes

Dielectrics

Silver

Printing

Capacitance

Magnesium

Back to Top