Comparison and evaluation of the laser beam-shaping techniques

Peter Barcik; Lucie Hudcova; Otakar Wilfert; Jose Luis Arce-Diego; Felix Fanjul-Velez; Irene Salas-Garcia; Noe Ortega-Quijano

doi:10.1117/12.2023213

25 September 2013 Comparison and evaluation of the laser beam-shaping techniques

Peter Barcik, Lucie Hudcova, Otakar Wilfert, Jose Luis Arce-Diego, Felix Fanjul-Velez, Irene Salas-Garcia, Noe Ortega-Quijano

Author Affiliations +

Proceedings Volume 8874, Laser Communication and Propagation through the Atmosphere and Oceans II; 88740E (2013) https://doi.org/10.1117/12.2023213
Event: SPIE Optical Engineering + Applications, 2013, San Diego, California, United States

Abstract

Over the past several decades, free-space optical (FSO) systems have gained a specific place in the wireless technology area. The application of these systems is advantageous for high bandwidths, a license free band and quick installation. The main drawback of FSO systems is their dependence on the state of the atmosphere causing deterioration of the FSO systems availability. One of the atmospheric effects which has an essential impact on the performance of the FSO systems is atmospheric turbulence. Atmospheric turbulence leads to fluctuation of the optical intensity in the plane of the receiving aperture. It has been shown that to reduce the effect of atmospheric turbulence, uniform distribution of the optical intensity within the cross section of the beam in the plane of transmitting aperture (phenomenon of diffraction is neglected) and a suffciently large diameter of the circularly symmetric receiving aperture (to achieve aperture averaging effect) are needed. The main idea of our paper is the problem of beam shaping at the transmitter. In our contribution the technique of transformation of a Gaussian beam into a beam with uniform distribution of optical intensity is discussed. For the mentioned transformation we experimentally tested several shaping methods such as multi aperture beam integrators, diffractive diffusers, etc. Usage of laser sources with different degrees of coherence was considered.

The purpose of these techniques is to create an optical beam with uniform distribution of optical intensity on the transmitter output. In order to compare and evaluate the particular shaping techniques, a new Trans- formation Complex Quality (TCQ) parameter was defined. The TCQ parameter indicates the optimal shaping technique and also evaluates the quality of the resulting transformed beam with respect to its resistance towards atmospheric turbulence.

Citation Download Citation

Peter Barcik, Lucie Hudcova, Otakar Wilfert, Jose Luis Arce-Diego, Felix Fanjul-Velez, Irene Salas-Garcia, and Noe Ortega-Quijano "Comparison and evaluation of the laser beam-shaping techniques", Proc. SPIE 8874, Laser Communication and Propagation through the Atmosphere and Oceans II, 88740E (25 September 2013); https://doi.org/10.1117/12.2023213

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available