Paper
17 April 2014 Comparative analysis of shot noise in EUV and e-beam lithography
Author Affiliations +
Abstract
Gray-scale e-beam lithography has been performed to match the EUV and e-beam aerial image log slope for studying shot noise fundamentals in the two mechanisms through line-edge roughness (LER) measurements for 50 nm lines and spaces patterned on a leading chemically amplified EUV resist. The measured e-beam exposure latitude decreased from 0.4 with binary patterning to 0.28 with gray-scale e-beam exposure designed to match the EUV incident image profile, closely matching the EUV exposure latitude of 0.26. Calculations of absorption statistics with EUV and e-beam suggest that the shot noise with e-beam patterning is expected to be 10% larger than the shot noise with EUV patterning. However, despite the matched image gradients and close to identical absorbed quanta predictions, the e-beam patterned LER is 2.5× larger than the EUV patterned LER.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Suchit Bhattarai, Weilun Chao, Andrew R. Neureuther, and Patrick P. Naulleau "Comparative analysis of shot noise in EUV and e-beam lithography", Proc. SPIE 9048, Extreme Ultraviolet (EUV) Lithography V, 90481H (17 April 2014); https://doi.org/10.1117/12.2048248
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Extreme ultraviolet

Line edge roughness

Electron beam lithography

Extreme ultraviolet lithography

Point spread functions

Absorption

Binary data

Back to Top