Sidewall roughness and line profile measurement of photoresist and finFET features by cross-section STEM and TEM image for reference metrology

Kiyoshi Takamasu; Haruki Okitou; Satoru Takahashi; Osamu Inoue; Hiroki Kawada; Vimal Kamineni; Abhijeet Paul; A. F. Bello

doi:10.1117/12.2046144

2 April 2014 Sidewall roughness and line profile measurement of photoresist and finFET features by cross-section STEM and TEM image for reference metrology

Kiyoshi Takamasu, Haruki Okitou, Satoru Takahashi, Osamu Inoue, Hiroki Kawada, Vimal Kamineni, Abhijeet Paul, A. F. Bello

Author Affiliations +

Proceedings Volume 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII; 90501K (2014) https://doi.org/10.1117/12.2046144
Event: SPIE Advanced Lithography, 2014, San Jose, California, United States

Abstract

The novel method of sub-nanometer uncertainty for the line width measurement and the line profile measurement using STEM (Scanning Transmission Electron Microscope) images is proposed to calibrate CD-SEM line width measurement and the standardization of line profile measurement as reference metrology. In accordance with the proposed method, we already have established the methodology of profile of Si line and photoresist feature for reference metrology. In this article, we applied the proposed method to the sidewall roughness measurement of photoresist features and line profile measurement of finFET features. Using the proposed method, specimens of photoresist feature and finFET feature are sliced as thin specimens of 100 nm thickness by FIB (Focused Ion Beam) micro sampling system. Then the cross-sectional images of the specimens are obtained by STEM and TEM. The sidewall roughness of photoresist features is estimated by the maximum slope of the image intensity graph at the edge. Then, the sidewall roughness is also measured by CD-AFM (Critical Dimension Atomic Force Microscope); we compared the results by STEM image and CD-AFM. Moreover, the line profile of finFET features is defined using TEM images for reference metrology. We compared the line width of fin measured by the proposed method and CD value by CD-SEM measurement.

Citation Download Citation

Kiyoshi Takamasu, Haruki Okitou, Satoru Takahashi, Osamu Inoue, Hiroki Kawada, Vimal Kamineni, Abhijeet Paul, and A. F. Bello "Sidewall roughness and line profile measurement of photoresist and finFET features by cross-section STEM and TEM image for reference metrology", Proc. SPIE 9050, Metrology, Inspection, and Process Control for Microlithography XXVIII, 90501K (2 April 2014); https://doi.org/10.1117/12.2046144

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE