Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries

Steffen Hau; Alexander York; Stefan Seelecke

doi:10.1117/12.2082871

1 April 2015 Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries

Steffen Hau, Alexander York, Stefan Seelecke

Author Affiliations +

Proceedings Volume 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015; 94300C (2015) https://doi.org/10.1117/12.2082871
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2015, San Diego, California, United States

Abstract

Circular dielectric electro-active polymer (DEAP) membrane actuators are easy to manufacture and therefore can be uniquely designed to perform optimally for specific applications. The performance of these actuators is naturally dependent on the materials used, and also dictated by the specific geometry of the circular design. For a given overall actuator size, changing their internal geometry will directly change the force and stroke output. In addition the DEAP technology itself is a promising technology for constructing lightweight, cost and energy efficient sensor and actuator systems. Thus, several potential applications like pressure sensors, pumps, valves, micro-positioners and loudspeakers were already proposed. The circular DEAP membrane actuators used in this study consist of a silicone based elastomer, carbon ink based electrodes, and are held together with a stiff frame. Experimentally collected force-displacement curves for these actuators can be used to determine force and stroke output of the actuators as described by Hodgins et al. in. This work presents an efficient method to predict these force-displacement plots and thus stroke and force output for different actuator geometries. These results than can be used to adapt the actuator geometry to the needs of a specific application with its particular force and stroke requirements. The prediction method is based on an average stress-stretch calculation for training samples. The calculated stress-stretch data is then geometry independent and can be used to predict desired geometry dependent force-displacement data for stroke and force output analysis.

Citation Download Citation

Steffen Hau, Alexander York, and Stefan Seelecke "Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries", Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 94300C (1 April 2015); https://doi.org/10.1117/12.2082871

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available