Paper
1 April 2015 Large-strain, high-stress tubular dielectric elastomer actuator with high pre-stretch and oil encapsulation
Gih-Keong Lau, Desmond D. Tan, Thanh-Giang La
Author Affiliations +
Abstract
Rolled dielectric elastomer actuators (DEA), which are prepared by rolling up a flat dielectric elastomer , are subjected to non-homogenous deformation and thus does not perform as well as the flat ones. Typically, the rolled ones reported actuation of not more than 37.3% axial strain; whereas the flat one undergoing pure-shear deformation reported much greater actuation . This study shows that oil encapsulation helps the rolled DEA suppress pre-mature breakdown. Under isotonic test, oil-encapsulated tubular DEAs sustain very high electric field of up to 712.0 MV/m, which is 50% higher than that of the dry DEAs. Hence, it can produce up to 50% axial strain while deforming the passive oil capsules. In addition, it produces an isometric stress up to nearly 0.6 MPa, 114% higher than that of the dry one.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gih-Keong Lau, Desmond D. Tan, and Thanh-Giang La "Large-strain, high-stress tubular dielectric elastomer actuator with high pre-stretch and oil encapsulation", Proc. SPIE 9430, Electroactive Polymer Actuators and Devices (EAPAD) 2015, 94300M (1 April 2015); https://doi.org/10.1117/12.2084531
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrical breakdown

Dielectrics

Dielectric elastomer actuators

Epoxies

Electrodes

Actuators

Adhesives

Back to Top