Paper
1 July 2015 Modal-interference-based temperature sensing using plastic optical fibers: markedly enhanced sensitivity near glass-transition temperature
Author Affiliations +
Proceedings Volume 9655, Fifth Asia-Pacific Optical Sensors Conference; 96552I (2015) https://doi.org/10.1117/12.2184389
Event: Fifth Asia Pacific Optical Sensors Conference, 2015, Jeju, Korea, Republic of
Abstract
We developed strain and temperature sensors based on multimode interference in perfluorinated graded-index (GI) plastic optical fibers, and investigate their sensing performance at 1300 nm. At room temperature, we achieve ultra-high sensitivities of strain and temperature of –112 pm/με and +49.8 nm/°C/m, the absolute value of which are approximately 7.2 and over 1800 times as large as those in silica GI multimode fibers, respectively. We also find that the temperature sensitivity is drastically enhanced with increasing temperature toward ~80 °C, where phase transition of core polymer partially occurs.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Goki Numata, Neisei Hayashi, Marie Tabaru, Yosuke Mizuno, and Kentaro Nakamura "Modal-interference-based temperature sensing using plastic optical fibers: markedly enhanced sensitivity near glass-transition temperature", Proc. SPIE 9655, Fifth Asia-Pacific Optical Sensors Conference, 96552I (1 July 2015); https://doi.org/10.1117/12.2184389
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Single mode fibers

Silica

Temperature metrology

Phase only filters

Polymer optical fibers

Polymers

Multimode fibers

Back to Top