Efficient ytterbium-doped phosphosilicate double-clad leakage-channel-fiber laser at 1008-1020 nm

Guancheng Gu; Zhengyong Liu; Fanting Kong; Hwayaw Tam; Ramesh K. Shori; Liang Dong

doi:10.1117/12.2200999

11 March 2016 Efficient ytterbium-doped phosphosilicate double-clad leakage-channel-fiber laser at 1008-1020 nm

Guancheng Gu, Zhengyong Liu, Fanting Kong, Hwayaw Tam, Ramesh K. Shori, Liang Dong

Author Affiliations +

Proceedings Volume 9728, Fiber Lasers XIII: Technology, Systems, and Applications; 97282Q (2016) https://doi.org/10.1117/12.2200999
Event: SPIE LASE, 2016, San Francisco, California, United States

Abstract

Thermal management is critical for kw-level power lasers, where mode instability driven by quantum defect heating is a major challenge. Tandem pumping using 1018nm fiber lasers are used to enable both high brightness and low quantum defect. It is, however, difficult to realize efficient 1018nm YDFL. The best demonstration to date is limited by the use of both conventional aluminosilicate host and smaller core diameters. In these cases, higher inversion is required due to the aluminosilicate host and higher pump brightness is required due to the smaller core, which results in high signal brightness for the same output power. These factors lead to large pump power to exit fiber, resulting in poor efficiency. Phosphosilicate host, on the other hand, requires much lower inversions to reach the gain threshold at 1018nm. The combination of phosphosilicate host and large-core leakage channel fibers (LCF) is a perfect candidate for efficient 1018nm fiber laser. We report a highly efficient Yb-doped phosphosilicate LCF laser with a quantum defect of 4.1% using a ~50μm-core diameter and ~420μm cladding diameter. The slope efficiency with respect to the launched pump power at 1018nm is 70%. The ASE suppression is <60dB. The large cladding of 420μm demonstrates a combination of high efficiency, ~4% quantum defect and high-power low-brightness diode pumping. We have also studied the limits of operating ytterbium fiber lasers at shorter wavelengths and found the efficiency to fall off at shorter wavelengths due to the much higher inversions required.

Citation Download Citation

Guancheng Gu, Zhengyong Liu, Fanting Kong, Hwayaw Tam, Ramesh K. Shori, and Liang Dong "Efficient ytterbium-doped phosphosilicate double-clad leakage-channel-fiber laser at 1008-1020 nm", Proc. SPIE 9728, Fiber Lasers XIII: Technology, Systems, and Applications, 97282Q (11 March 2016); https://doi.org/10.1117/12.2200999

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Fiber lasers

Fiber Bragg gratings

Cladding

Quantum efficiency

Ytterbium

Diodes

Reflectivity

Show All Keywords

Keywords/Phrases

Search In:

Publication Years