Patterned mask inspection technology with projection electron microscope technique on extreme ultraviolet masks

Ryoichi Hirano; Susumu Lida; Tsuyoshi Amano; Tsuneo Terasawa; Hidehiro Watanabe; Masahiro Hatakeyama; Takeshi Murakami; Kenji Terao

doi:10.1117/1.JMM.13.1.013009

21 February 2014 Patterned mask inspection technology with projection electron microscope technique on extreme ultraviolet masks

Ryoichi Hirano, Susumu Lida, Tsuyoshi Amano, Tsuneo Terasawa, Hidehiro Watanabe, Masahiro Hatakeyama, Takeshi Murakami, Kenji Terao

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 13, Issue 1, 013009 (February 2014). https://doi.org/10.1117/1.JMM.13.1.013009

Abstract

High-sensitivity extreme ultraviolet (EUV) mask pattern defect detection is one of the major issues remaining to be addressed in device fabrication using extreme ultraviolet lithography. In order to achieve inspection sensitivity and suitability for the 1× nm node, a projection electron microscope (PEM) system is employed that enables high-speed/high-resolution inspection, which is not possible using conventional deep ultraviolet or electron beam inspection systems. By employing higher electron energy in the electron optics (EO) exposure system and by improving the PEM design, we have minimized the aberration that occurs when working with EO systems and we have improved the transmittance of the system. Experimental results showing the improved transmittance were obtained by making electron throughput measurements. To guarantee the tool’s aptness for 16-nm node EUV mask inspection, corresponding sized programmed defects on masks were designed, and the defect detection sensitivity of the EO system was evaluated. Improvements in image resolution and electron throughput have enabled us to detect 16-nm sized defects. The PEM system was integrated into a pattern inspection system for defect detection sensitivity evaluation.

Citation Download Citation

Ryoichi Hirano, Susumu Lida, Tsuyoshi Amano, Tsuneo Terasawa, Hidehiro Watanabe, Masahiro Hatakeyama, Takeshi Murakami, and Kenji Terao "Patterned mask inspection technology with projection electron microscope technique on extreme ultraviolet masks," Journal of Micro/Nanolithography, MEMS, and MOEMS 13(1), 013009 (21 February 2014). https://doi.org/10.1117/1.JMM.13.1.013009

Published: 21 February 2014

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE