In-die overlay metrology method using SEM images

Minoru Harada; Yohei Minekawa; Fumihiko Fukunaga; Koji Nakamae

doi:10.1117/1.JMM.17.4.044004

20 December 2018 In-die overlay metrology method using SEM images

Minoru Harada, Yohei Minekawa, Fumihiko Fukunaga, Koji Nakamae

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 17, Issue 4, 044004 (December 2018). https://doi.org/10.1117/1.JMM.17.4.044004

Abstract

We present an overlay measurement method that is designed to use scanning electron microscope (SEM) images taken in the circuit pattern region. In the semiconductor manufacturing, the overlay is currently measured using target patterns fabricated in the scribe line region. However, there are residual errors between the measurement values in the scribe line region and the actual values in the circuit pattern region. Therefore, in-die overlay accuracy measurements using circuit patterns are required for precise overlay control. We have developed an in-die overlay accuracy measurement method based on SEM images. The overlay is directly measured by comparing a golden image and a test image captured in the circuit pattern region. Each layer is automatically recognized from the images by utilizing a “graph cut” technique, and the placement error between the two images is determined and used to calculate the overlay accuracy. This enables us to measure the overlay accuracy without specially designed target patterns or the setting up of measurement cursors. In the numerical experiments using pseudoimages, the proposed method has linearity and sensitivity for the subpixel-order overlay even if the patterns have size variations. The basic performance of this method was evaluated using real SEM images. A measurement repeatability of less than 1.35 nm (0.36 pixel) was achieved, and a reasonable wafer map of the overlay was obtained.

Citation Download Citation

Minoru Harada, Yohei Minekawa, Fumihiko Fukunaga, and Koji Nakamae "In-die overlay metrology method using SEM images," Journal of Micro/Nanolithography, MEMS, and MOEMS 17(4), 044004 (20 December 2018). https://doi.org/10.1117/1.JMM.17.4.044004

Received: 22 June 2018; Accepted: 30 November 2018; Published: 20 December 2018

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available