Errata: Simulation and modeling of laser range profiling and imaging of small surface vessels

Ove Steinvall; Tomas R. Chevalier; Christina Grönwall

doi:10.1117/1.OE.53.2.029801

21 February 2014 Errata: Simulation and modeling of laser range profiling and imaging of small surface vessels

Ove Steinvall, Tomas R. Chevalier, Christina Grönwall

Author Affiliations +

Optical Engineering, Vol. 53, Issue 2, 029801 (February 2014). https://doi.org/10.1117/1.OE.53.2.029801

Abstract

This article [Opt. Eng.. 53, (1 ), 013109 (2014)] was originally published on 3 February 2014 with Fig. 18 duplicated as Fig. 19. The missing Fig. 19 is reprinted below.

This article [Opt. Eng. 53(1), 013109 (2014)] was originally published on 3 February 2014 with Fig. 18 duplicated as Fig. 19. The missing Fig. 19 is reprinted below.

Fig. 19

Illustration of the effect of large beam jitter with an rms value equal to 1/3 of the field-of-view (FOV). The peak positions remain aunchanged but not the mutual peak amplitudes.

The paper was corrected online on 7 February 2014. It appears correctly in print.

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.

Citation Download Citation

Ove Steinvall, Tomas R. Chevalier, and Christina Grönwall "Errata: Simulation and modeling of laser range profiling and imaging of small surface vessels," Optical Engineering 53(2), 029801 (21 February 2014). https://doi.org/10.1117/1.OE.53.2.029801

Published: 21 February 2014

Access the abstract

JOURNAL ERRATUM
2 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY