A novel scheme is proposed to achieve all-optical SPM-based wavelength conversion in a bismuth oxide-based highly
nonlinear photonic crystal fiber. It consists of erbium-doped fiber amplifier, optical circulator, Fiber Fabry-Perot filters,
photonic crystal fiber and fiber Bragg grating. Owing to SPM, a recirculating configuration is designed to induce the
further spectral broadening and wavelength conversion is achieved with a tunable Fiber Fabry-Perot filter. The
simulation results of bismuth oxide-based photonic crystal fiber indicate that the effective index of the fundamental
mode increases monotonically with the increase in the hole pitch, or the decrease in the ratio of the hole diameter to the
hole pitch. The mode effective area steadily increases with the hole pitch. The nonlinear coefficient, which is beneficial
to shorten the fiber length and reduce the required optical power, is expected to be 1100W-1km-1 by using bismuth
oxide-based glass with high nonlinear refractive index and reducing the effective core area with holey microstructure.
The mode-field diameter of bismuth oxide-based is estimated to be 1.98μm and the predicted small effective core area is
3.3μm2. The propagation loss at 1550nm is about 0.8dB/m. The obtained results show that SPM-based PCF-WC has a
potential of wide conversion bandwidth, high response time, simple configuration and low insertion loss etc.
A simple architecture of all-optical wavelength conversion in a highly nonlinear bismuth oxide-based photonic crystal
fiber (PCF) is proposed, which consists of an erbium-doped fiber amplifier, a polarization controller, a nonlinear medium
PCF, two tunable fiber Fabry-Perot filters and an optical isolator. Self-phase modulation is utilized to induce spectral
broadening for all-optical wavelength conversion. The desired dispersion properties can be tailored by the parameters of
bismuth oxide-based PCF microstructure. The propagation loss at 1550nm is about 0.8dB/m. The nonlinear coefficient is
expected to be 1100W-1km-1 by using bismuth oxide-based glass and reducing the effective core area. The mode-field
diameter of PCF is estimated to be 1.98μm and the predicted effective core area is 3.3μm2. The intermediate high
numerical aperture fibers between bismuth oxide-based PCF and single-mode fibers are considered to reduce the splicing
loss. The obtained results show that the all-optical wavelength converter has a potential of high conversion efficiency,
wide conversion bandwidth, ultrafast response time, compact configuration and low insertion loss etc.
A novel architecture of all-optical wavelength conversion in a highly nonlinear bismuth oxide-based photonic crystal
fiber (PCF) is demonstrated. Self-phase modulation is utilized to induce spectral broadening for the all-optical
wavelength converter. A recirculating configuration is designed to obtain the twice spectral broadening. Therefore,
wavelength conversion is achieved. The design and the simulation of PCF are demonstrated. The desired dispersion
properties can be tailored by the parameters of bismuth oxide (Bi2O3) PCF microstructure. The propagation loss at
1550nm is about 0.8dB/m. The simulation results of PCF indicate the relationship of the effective index of the
fundamental mode, the mode effective area and the holes pitch of PCF. The nonlinear coefficient is expected to be
1100W-1km-1 by using bismuth oxide-based glass and reducing the effective core area. The mode-field diameter of PCF
is estimated to be 1.98μm and the predicted small effective core area is 3.3μm2. The design of Bi2O3-based PCF and the
intermediate high numerical aperture fibers between Bi2O3-based PCF and single-mode fibers are considered to reduce
the splicing loss. The obtained results show that the wavelength converter has a potential of wide conversion bandwidth,
high response time, simple configuration and low insertion loss etc.
A novel high-speed magneto-optic (MO) modulator which consists of an integrated wire grid polarizer (WGP), Bi-YIG
waveguide with cladding layer and conducting micro-strip line is proposed. With the integrated WGP, this MO
modulator is faster, more accurate and more stable because it is not only completely driven by electric signals but also
has no mechanically moving parts. Moreover, it is compact-structured and low-cost. Large Faraday rotation is obtained
with specific arrangement of the directions of the bias magnetic field and the modulation RF magnetic field. Optical
route and optic-electrical detect circuit are also designed and analyzed.
All-optical wavelength converters (AOWCs) that utilize nonlinearities in semiconductor optical amplifiers (SOAs) have
attracted considerable research interest. AOWCs based on cross gain modulation (XGM) have a large dynamic range of
the input optical signal power but a low extinction ratio (ER) and a high chirp, whereas AOWCs based on cross phase
modulation (XPM) provide a low chirp and a high ER but suffer from a relative small input power dynamic range. We
point out that there seems to be some complementarity between XGM and XPM. Based on this, we propose a novel
scheme for cascaded wavelength conversion based on cross gain modulation and cross phase modulation in SOAs thus is
expected to have a high ER and a large input power dynamic range simultaneously. The wavelength conversion
operation includes two stages, that is, XGM in the first stage followed by the stage of XPM. In the XGM stage, we use a
band pass filter to increase the frequency response of the SOA. In the XPM, we use the bidirectional input scheme for
MZI to improve the response of XPM and cancel XGM-induced intensity unbalance to get a relative perfect interference.
All-optical wavelength converters (AOWCs) are considered to be important components in future wavelength-division-multiplexed
(WDM) networks. Cross gain modulation schemes in semiconductor optical amplifiers (SOA) are promising
candidates for an all-optical wavelength conversion application due to the simple implementation and effective
conversion. However, the slow gain recovery time of SOA limits the maximum operation speed and causes unwanted
pattern effects. This paper provides a novel scheme for wavelength conversion enables ultra-fast conversion speed. On
the one hand, we utilize a three-wavelength-device (TWD) to reduce the recovery time of the SOA. On the other hand,
we use an optical band pass filter (OBF) which central wavelength is blue shifted with respect to the central wavelength
of the probe beam to increase the frequency response. The combination of a reduction of the SOA recovery time and an
increase of the frequency response enables conversion speed potentially to achieve 160 Gb/s or even faster.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.