Paper
21 February 2011 Investigation on solid state Nd3+:YAG line beam laser annealing and texturing of amorphous silicon thin films
Author Affiliations +
Abstract
Fabrication of textured poly-crystalline silicon films from amorphous-silicon (a-Si) films using a line beam is investigated. The mechanism of laser annealing and simultaneously form a nano-textured surface using an Nd3+: YAG laser at a wavelength of 355 nm with a line beam is discussed. Amorphous-Si films coated on glass and crystalline silicon substrates were treated with different laser fluence from 100 to 600 mJ/cm2 and with 90% beam overlap. The crystallization and texturization characteristics were analyzed through SEM, Raman Spectroscopy, AFM, resistance and absorbance measurements. Generation of polycrystalline textured peaks was confirmed with different characterization methods and compared with the results of the conventional circular beam. This approach of line beam with increase in the scanning speed will allow the faster production of polycrystalline silicon from a-Si for photovoltaic application.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. J. Vasa, A. I. Palani, and M. Singaperumal "Investigation on solid state Nd3+:YAG line beam laser annealing and texturing of amorphous silicon thin films", Proc. SPIE 7920, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVI, 79200M (21 February 2011); https://doi.org/10.1117/12.874844
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amorphous silicon

Annealing

Crystals

Laser crystals

Resistance

Silicon films

Raman spectroscopy

Back to Top