Paper
5 July 2000 Experimentation and modeling of organic photocontamination on lithographic optics
Author Affiliations +
Abstract
Photodeposition of organic films on transparent substrates irradiated in the presence of trace levels of hydrocarbons has been experimentally investigated and a model is presented that describes the film growth behavior. The efficacy of a given organic precursor at forming a deposit is proportional to the product of its surface coverage and by its photon absorption cross section. These measurement are important in predicting the transmission characteristics of lithographic optics operating at 157-, 193-, and 248-nm wavelength. For example, a lens element irradiated continuously for one year in the presence of 1 part per billion of t-butyl benzene would exhibit a transmission of approximately 87 percent at 193 nm. The effects of oxygen- containing ambients are also documented, and methods for elimination and/or prevention of organic contamination are suggested.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Roderick R. Kunz, Vladimir Liberman, and Deanna K. Downs "Experimentation and modeling of organic photocontamination on lithographic optics", Proc. SPIE 4000, Optical Microlithography XIII, (5 July 2000); https://doi.org/10.1117/12.389036
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Contamination

Ozone

Absorption

Lithography

Nitrogen

Chemical vapor deposition

Natural surfaces

Back to Top