Simulation study of process latitude for liquid immersion lithography

So-Yeon Baek; Daniel C. Cole; Mordechai Rothschild; Michael Switkes; Michael S. Yeung; Eytan Barouch

doi:10.1117/1.1637365

1 January 2004 Simulation study of process latitude for liquid immersion lithography

So-Yeon Baek, Daniel C. Cole, Mordechai Rothschild, Michael Switkes, Michael S. Yeung, Eytan Barouch

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 3, Issue 1, (January 2004). https://doi.org/10.1117/1.1637365

Abstract

A simulation package has been developed for predicting the influence of immersion, i.e., the presence of a uniform liquid layer between the last objective lens and the photoresist, on optical projection lithography. This technology has engendered considerable interest in the microlithography community during the past year, as it enables the real part of the index of refraction in the image space, and thus the numerical aperture of the projection system, to be greater than unity. The simulation program described here involves a Maxwell vector solution approach, including polarization effects and arbitrary thin film multilayers. We examine here the improvement in process window afforded by immersion under a variety of conditions, including λ = 193 nm and 157 nm, annular illumination, and the use of alternating phase shift mask technology. Immersion allows printing of dense lines and spaces as small as 45 nm with acceptable process window. We also examine the effect of variations in liquid index on the process window and conclude that the index of the liquid must be known to and maintained within a few parts per million. This has important implications for the temperature control required in future liquid immersion projection systems.

©(2004) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

So-Yeon Baek, Daniel C. Cole, Mordechai Rothschild, Michael Switkes, Michael S. Yeung, and Eytan Barouch "Simulation study of process latitude for liquid immersion lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 3(1), (1 January 2004). https://doi.org/10.1117/1.1637365

Published: 1 January 2004

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE