Comparative annealing effect on bonded wafers in air and ultrahigh vacuum for microelectromechanical systems/microfluidics packaging

Matiar M. R. Howlader; Tadatomo Suga

doi:10.1117/1.3500747

1 October 2010 Comparative annealing effect on bonded wafers in air and ultrahigh vacuum for microelectromechanical systems/microfluidics packaging

Matiar M. R. Howlader, Tadatomo Suga

Author Affiliations +

Journal of Micro/Nanolithography, MEMS, and MOEMS, Vol. 9, Issue 4, 041107 (October 2010). https://doi.org/10.1117/1.3500747

Abstract

The fundamentals of room temperature bonding methods-surface activated bonding (SAB) and sequentially plasma-activated bonding (SPAB)-are reviewed with applications for packaging of microelectromechanical systems (MEMS) and microfluidic devices. The room temperature bonding strength of the silicon/silicon interface in the SAB and SPAB is as high as that of the hydrophilic bonding method, which requires annealing as high as 1000°C to achieve covalent bonding. After heating, voids are not observed and bonding strengths are not changed in the SAB. In the SPAB, interfacial voids are increased and decreased the bonding strength. Water rearrangement such as absorption and desorption across the bonded interface is found below 225°C. While voids are not significant up to 400°C, a considerable amount of thermal voids above 600°C is found due to viscous flow of oxides. Before heating, interfacial amorphous layers are observed both in the SAB (8.3 nm) and SPAB (4.8 nm), but after heating these disappear and enlarge in the SAB and SPAB, respectively. This enlarged amorphous layer is SiO₂, which is due to the oxidation of silicon/silicon interface after sequential heating. The bonding strength, sealing, and chemical performances of the interfaces meet the requirements for MEMS and microfluidics applications.

©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)

Citation Download Citation

Matiar M. R. Howlader and Tadatomo Suga "Comparative annealing effect on bonded wafers in air and ultrahigh vacuum for microelectromechanical systems/microfluidics packaging," Journal of Micro/Nanolithography, MEMS, and MOEMS 9(4), 041107 (1 October 2010). https://doi.org/10.1117/1.3500747

Published: 1 October 2010

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE