A single GaAs/GaAsSb/GaAs quantum well having a valence band profile was described in this study using the V-shaped potential. An external static electric field (E-field) and a high-frequency intense laser irradiation were utilized to examine the first-order linear and third-order nonlinear optical properties. The theoretical modeling was achieved using a compact-density matrix and iterative process in a two-level system framework. The position-dependent effective mass approximation was applied to solve the Schrödinger equation and evaluating the energy states and their corresponding wavefunctions for the two lowest bound states within the quantum well’s valence band with regards to a heavy hole. We extended the investigation of the single V-shaped potential by incorporating the effects of the E-field, the well’s half-width, and antimony (Sb) content on optical characteristics. The study on the combined effects of the intense laser field and the mentioned factors revealed that the peak positions and amplitudes of the linear and nonlinear optical characteristics were strongly influenced by variation in the laser strength. Specifically, we observed, that under higher laser dressing parameters, the application of the electric field played an important role. This occurred when the impact of the well’s half-width and Sb content became prominent at values of lower laser-dressing parameters. It is significant to note that our findings will have potential real-world applications in photonics, optoelectronics, and related areas.

The band-gap of InxGa1−xN can cover a wide range of electromagnetic radiation of the solar spectrum and offers a method for using it in photovoltaic solar cells. A solar cell structure consisting of InxGa1−xN/GaN superlattice (SL) piled up between p-GaN and n-GaN is modeled and simulated. The impact of variations in the indium mole fraction and step graded SL having different quantum well thicknesses are analyzed. The results indicate that high indium content leads to lattice mismatch, decrement of fill factor, and development of strain in the quantum wells that reduce the overall efficiency. To increase the efficiency of the solar cell, a step graded 20 SL with a 5 nm quantum well thickness is introduced, and the highest efficiency of 22.6% is obtained. The use of a step graded SL InGaN cell allows for constructing real structures with the possibility of obtaining the enhanced power conversion efficiency compared with a conventional quantum well solar cell using SILVACO TCAD.