19 January 2023 Implementation of encoder and decoder for low-density parity-check codes in continuous-variable quantum key distribution on a field programmable gate array
Author Affiliations +
Abstract

Quantum key distribution (QKD) can provide an unconditionally secure communication encryption method. Continuous-variable QKD (CVQKD) requires extracting the key from the noisy channel, leading to higher requirements for the error-correcting codes used in multidimensional reconciliation. We extend the quasi-cyclic low-density parity-check of the radio design for the global 5G mobile communication technology standard to achieve error correction under lower signal-to-noise ratio on integrated hardware. A field programmable gate array (FPGA) chip is used to realize the approximate lower triangular matrix encoding algorithm, and the core module only has the circular shift register, which reduces the encoding complexity, improves the encoding efficiency, and reduces the hardware resource consumption. For extended super-long code words, the decoding algorithm requires additional hardware resources to implement, which the previous algorithm cannot meet. Therefore, we present a hardware implementation of offset minimum sum algorithm (OMSA), which can avoid operations of complex mathematical formula. The offset factor of OMSA reduce the error caused by the low accuracy of calculation on the hardware. The update of the decoding information is layered in a partially parallel way in the matrix to achieve the cross processing of node information. It speeds up the transmission of information between different nodes and the convergence of decoding algorithm of low-complexity parallel structure. Simulation results show that the maximum theoretical coordination efficiency is 85% when the code with block length is 69632 at a bit rate of 22/68 and the signal-to-noise ratio asymptotic threshold is 0.7. Using an FPGA, ∼0.1 frame error rate was achieved, but with a zero-bit error rate, the optimal achievable secret key rate is about 200 Kbps at 30-km distance theoretically. For a 200-MHz system clock on the successfully decoded block, 125 Gbps encoding throughput and 472 Kbps decoding throughput was achieved, better than the theoretical key rate of prototype of CVQKD.

© 2023 Society of Photo-Optical Instrumentation Engineers (SPIE)
Xiunan Sun and Hao Liang "Implementation of encoder and decoder for low-density parity-check codes in continuous-variable quantum key distribution on a field programmable gate array," Optical Engineering 62(1), 014105 (19 January 2023). https://doi.org/10.1117/1.OE.62.1.014105
Received: 27 May 2022; Accepted: 2 January 2023; Published: 19 January 2023
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Matrices

Continuous variable quantum key distribution

Signal to noise ratio

Field programmable gate arrays

Quantum channels

Quantum hardware

Optical engineering

RELATED CONTENT

L1-PCA with quantum annealing
Proceedings of SPIE (June 10 2024)
Comparison of ISO MPEG1 and MPEG2 video-coding standards
Proceedings of SPIE (October 22 1993)

Back to Top