We report technological advances in thin-disk laser technology enabling further scaling of average output power and beam quality. A newly developed resonator design serves as a universal building block for industrial-grade thin-disk lasers from 6 to 24 kW. The robust resonator design allows for power levels beyond 12 kW from a single disk with a beam parameter product (BPP) of ~ 4 mm*mrad. By polarization combining of the output of two resonators, i.e. two laser disks, the power can be doubled to up to 24 kW while maintaining the good beam quality. The mentioned properties render the new TruDisk lasers ideal for high-throughput laser material processing. With slight modifications of our setup we also achieve a BPP of ~ 2 mm*mrad with < 8 kW output power. The optical setup provides two fiber outputs, switchable on a < 100 ms timescale, that can be equipped with different types of exchangeable processing fibers for maximum productivity and flexibility. It is possible to use TRUMPF’s BrightLine Weld (BLW) technology in combination with a 50/200 µm dual-core fiber at each fiber port. The BLW technology allows for distribution of the laser power between the 50 µm fiber core and a 200 µm ring, enabling a significant increase in productivity and quality in welding. We use BLW with a 50/200 µm dual-core fiber for welding of stator hairpins for electric drives at a quality and speed unattained so far.
Green disk lasers are the superior tool among industrial lasers operating in the visible wavelength regime, whenever a combination of high power and very good beam quality is desired. We report latest lab and application results, showing the potential of the technology beyond today´s commercially available products and use cases. TRUMPF´s green TruDisk lasers are based on a well-established and proven thin disk oscillator design with an added internal-resonator nonlinear crystal for the generation of second harmonic of 515 nm. Power level and beam parameter product of these devices have significantly been improved recently, leading to a commercially available product of 2 kW in combination with a 100 µm fiber core diameter and NA 0.1. Here, we report results on our new 3 kW green TruDisk laser, showing the progress achieved in making this power-enhanced laser a stable, reliable tool for industrial applications. Moreover, lab results will be presented that indicate the potential for further power scaling beyond 3 kW output power. The benefits of visible laser light in comparison to standard IR laser wavelengths around 1000 nm in terms of machining highly reflective materials are demonstrated. Due to the much higher absorption at room temperature, process stability, efficiency and reproducibility are significantly improved. The green laser light enables spatter-free weld connections of copper parts, and welding in heat conduction mode, such as on multiple layers of copper foils. This makes green TruDisk lasers an extremely versatile and easy-to-use tool for a range of applications, for example in the context of eMobility and power storage.
We report on industrial high-power lasers in the green wavelength regime. By means of a thin disk oscillator and a resonator-internal nonlinear crystal for second harmonic generation we provide 2000 W continuous-wave laser radiation at a wavelength of 515 nm, transported by a fiber with a 150 µm core diameter and NA 0.1. Application tests show that this laser is perfectly suited for copper welding due to the superior absorption of the green wavelength compared to IR, which allows the production of spatter-free weld spots and seams with an unprecedented reproducibility in diameter and welding depth. Now with 2 kW available power in the green, the welding performance for high quality welds can be increased compared to the already available 1 kW green laser system. The higher power leads to a larger melt volume and higher process efficiency. It is also possible to weld other materials with high quality results, for example stainless steel or aluminum. A particular advantage compared to the common IR lasers is the ability of the green laser for heat conduction mode because of the higher absorption. But due to the high beam quality also high-quality deep penetration welding is applicable, with the comfort to use scanner optics with a big field of work. This offers a whole range of new applications, e.g. remotedeburring of copper parts or producing a shiny copper surface by using shielding gas in addition. A further significant benefit of the green wavelength is that the surface condition does not influence the welding process, which allows to skip many expensive preprocessing steps such as tin-coating. Especially for e-mobility tasks the green 2 kW laser source is a suitable option for increasing productivity and quality: One example are copper foil stacks for battery production, which can be welded with higher speed and reduced spatter formation without ultrasonic pre-welding.
We report on industrial high-power lasers in the green wavelength regime. By means of a thin disk oscillator and a resonator-internal nonlinear crystal for second harmonic generation we provide 2000 W continuous-wave laser radiation at a wavelength of 515 nm. Careful shaping and stabilization of the polarization and spectral properties leads to an excellent optical-to-optical efficiency (pump to green) above 55%. The beam parameter product is designed and measured to be below 7 mm∙mrad which allows the transport with a fiber of 150 μm core diameter and standard numerical aperture of 0.1. Fiber and beam guidance optics are adapted to the green wavelength, enabling low transmission losses and stable operation. The laser, beam guidance as well as a chiller and the common customer interfaces are packaged within a compact footprint of less than 1 m². The green laser is equipped with a wide range of sensors and interfaces, enabling the user to integrate the laser in a production network and to benefit from features such as condition monitoring and predictive maintenance. Application tests show that this laser is perfectly suited for copper welding due to the superior absorption of the green wavelength compared to IR, which allows the production of spatter-free weld spots and seams with an unprecedented reproducibility in diameter and welding depth. With the new green 2 kW laser, the welding performance for high quality welds can be increased compared to the already available 1 kW system.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.