HARMONI is the first light visible and near-IR integral field spectrograph for the ELT. It covers a large spectral range from 450 nm to 2450 nm with resolving powers from 3500 to 18000 and spatial sampling from 60 mas to 4 mas. It can operate in two Adaptive Optics modes - SCAO (including a High Contrast capability) and LTAO - or with NOAO. The project is preparing for Final Design Reviews. HARMONI is a work-horse instrument that provides efficient, spatially resolved spectroscopy of extended objects or crowded fields of view. The gigantic leap in sensitivity and spatial resolution that HARMONI at the ELT will enable promises to transform the landscape in observational astrophysics in the coming decade. The project has undergone some key changes to the leadership and management structure over the last two years. We present the salient elements of the project restructuring, and modifications to the technical specifications. The instrument design is very mature in the lead up to the final design review. In this paper, we provide an overview of the instrument's capabilities, details of recent technical changes during the red flag period, and an update of sensitivities.
KEYWORDS: Optical spheres, Sensors, Planets, Spectrographs, Iterated function systems, Stars, Spectral resolution, Coronagraphy, Adaptive optics, Signal to noise ratio
MedRes is a proposed MEDium RESolution integral field spectrograph for upgrading SPHERE, the high contrast instrument for the ESO VLT telescope. MedRes is actually thought of as a potential Visitor Instrument with the scope to provide high contrast diffraction limited medium-high resolution spectra (R ≥ 1000) over a reasonably large field of view (a square with a side of at least 0.4) and across the spectral region 1.2-1.65 microns. Two main science objectives are driving the proposition for such an instrument on SPHERE. First of all, MedRes shall improve the detection of previously unknown giant planets (contrast 10−5 , goal 10−6 ), in particular accreting planets, at small separation from the star (< 0.2”, goal, 0.1”). And second, MedRes will boost the characterisation of known (faint) planets at a spectral resolution substantially higher than currently possible with SPHERE IFS (R ~ 35 − 50) and for contrasts much better than achievable with IRDIS Long Slit Spectroscopy (LSS) at small separations. The design will be optimised for SPHERE, fully exploiting the capabilities offered by a second stage Adaptive Optics (SAXO+) and complementing the niches of IRDIS, IFS and HiRise in the near IR channel. A preliminary optomechanical design and simulations of performance will be presented.
SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line (3 − 10 au), to bridge the gap with complementary techniques (radial velocity, astrometry); 2/ to observe fainter and redder targets in the youngest (1 − 10 Myr) associations compared to those observed with SPHERE to directly study the formation of giant planets in their birth environment; 3/ to improve the level of characterization of exoplanetary atmospheres by increasing the spectral resolution in order to break degeneracies in giant planet atmosphere models. Achieving these objectives requires to increase the bandwidth of the xAO system (from ~1 to 3 kHz) as well as the sensitivity in the infrared (2 to 3 mag). These features will be brought by a second stage AO system optimized in the infrared with a pyramid wavefront sensor. As a new science instrument, a medium resolution integral field spectrograph will provide a spectral resolution from 1000 to 5000 in the J and H bands. This paper gives an overview of the science drivers, requirements and key instrumental tradeoff that were done for SPHERE+ to reach the final selected baseline concept.
The direct characterization of exoplanetary systems with high contrast imaging is among the highest priorities for the broader exoplanet community. As large space missions will be necessary for detecting and characterizing exo-Earth twins, developing the techniques and technology for direct imaging of exoplanets is a driving focus for the community. For the first time, JWST will directly observe extrasolar planets at mid-infrared wavelengths beyond 5 μm, deliver detailed spectroscopy revealing much more precise chemical abundances and atmospheric conditions, and provide sensitivity to analogs of our solar system ice-giant planets at wide orbital separations, an entirely new class of exoplanet. However, in order to maximise the scientific output over the lifetime of the mission, an exquisite understanding of the instrumental performance of JWST is needed as early in the mission as possible. In this paper, we describe our 55-hour Early Release Science Program that will utilize all four JWST instruments to extend the characterisation of planetary mass companions to ∼15-20 μm as well as image a circumstellar disk in the mid-infrared with unprecedented sensitivity. Our program will also assess the performance of the observatory in the key modes expected to be commonly used for exoplanet direct imaging and spectroscopy, optimize data calibration and processing, and generate representative datasets that will enable a broad user base to effectively plan for general observing programs in future cycles.
Combining adaptive optics and interferometric observations results in a considerable contrast gain compared to single-telescope, extreme AO systems. Taking advantage of this, the ExoGRAVITY project is a survey of known young giant exoplanets located in the range of 0.1” to 2” from their stars. The observations provide astrometric data of unprecedented accuracy, being crucial for refining the orbital parameters of planets and illuminating their dynamical histories. Furthermore, GRAVITY will measure non-Keplerian perturbations due to planet-planet interactions in multi-planet systems and measure dynamical masses. Over time, repetitive observations of the exoplanets at medium resolution (R = 500) will provide a catalogue of K-band spectra of unprecedented quality, for a number of exoplanets. The K-band has the unique properties that it contains many molecular signatures (CO, H2O, CH4, CO2). This allows constraining precisely surface gravity, metallicity, and temperature, if used in conjunction with self-consistent models like Exo-REM. Further, we will use the parameter-retrieval algorithm petitRADTRANS to constrain the C/O ratio of the planets. Ultimately, we plan to produce the first C/O survey of exoplanets, kick-starting the difficult process of linking planetary formation with measured atomic abundances.
HARMONI is a first-light visible and near-IR integral field spectrograph of ESO’s Extremely Large Telescope (ELT) which will sit on top of Cerro Armazones, Chile. A Single Conjugate Adaptive Optics (SCAO) subsystem will provide diffraction-limited spectro-images in a Nyquist-sampled 0.61 x 0.86 arcsec field of view, with a R=3000-20000 spectral resolution. Inside the instrument, a High Contrast Module (HCM) could give HARMONI the ability to spectrally characterize young giant exoplanets (and disks) with flux ratio down to 10−6 as close as 100-200mas from their star. This would be achieved with an apodized pupil coronagraph to attenuate the diffracted light of the star and limit the dynamic range on the detector, and an internal ZELDA wavefront sensor to calibrate non-common path aberrations, assuming that the surface quality of the relay optics of HARMONI satisfy specific requirements. This communication presents (a) the system analysis that was conducted to converge towards these requirement, and the proposed HCM design, (b) an end-to-end simulation tool that has been built to produce realistic datacubes of hour-long observations, and (c) the estimated performance of the HCM, which has been derived by applying differential imaging techniques on the simulated data.
Over the past few years, several large ground-based facilities have enhanced their exoplanet direct imaging capabilities to observe planetary companions and debris disks around nearby stars. The Gran Telescopio Canarias (GTC) will soon have its first high-contrast capabilities with FRIDA. This near-infrared imager and integral field spectrograph will operate with GTCAO, the adaptive optics system of the telescope, to cover a broad range of astrophysical topics. In 2008, we performed preliminary studies to design a high-contrast mode for FRIDA. In this communication, we revisit these studies by investigating different options in coronagraphy to define a final high-contrast baseline for this instrument. Acknowledging the mechanical constraints of FRIDA and the GTCAO performance for high-contrast observations (60% Strehl ratio in K-band), we evaluate different options such as standalone pupil apodizations and classical Lyot coronagraphs to achieve a 10−5 contrast at 200-300 mas from an observed star over wide spectral bands. We then derive the adopted solutions for design and manufacturing of the prototypes. Finally, we discuss possible combinations of high-dispersion spectroscopy and high-contrast imaging for advanced exoplanet observations with this instrument.
HARMONI is a first-light visible and near-IR integral field spectrograph of ESO’s Extremely Large Telescope (ELT) which will sit on top of Cerro Armazones, Chile. A Single Conjugate Adaptive Optics (SCAO) sub-system will provide diffraction-limited spectral images in a Nyquist-sampled 0.61 × 0.86 arcsec field of view, with a R=3000-20000 spectral resolution. Inside the instrument, a High Contrast Module (HCM) will add an essential high-contrast imaging capability for HARMONI to spectrally characterize young giant exoplanets and disks with flux ratio down to 1e-6 at 0.1-0.2” from their star. The HCM uses an apodized pupil coronagraph to lower the intensity of the diffracted starlight and limit the dynamic range on the detector, and an internal wavefront sensor to calibrate non-common path aberrations. This communication first summarizes the basic technical requirements of the HCM, then describes its optical and mechanical designs, and presents expected performance in terms of achievable contrast, image quality and throughput. Elements of the development and test program are also given.
In Spring 2013, the LEECH (LBTI Exozodi Exoplanet Common Hunt) survey began its ~130-night campaign from the Large Binocular Telescope (LBT) atop Mt Graham, Arizona. This survey benefits from the many technological achievements of the LBT, including two 8.4-meter mirrors on a single fixed mount, dual adaptive secondary mirrors for high Strehl performance, and a cold beam combiner to dramatically reduce the telescope’s overall background emissivity. LEECH neatly complements other high-contrast planet imaging efforts by observing stars at L’ (3.8 μm), as opposed to the shorter wavelength near-infrared bands (1-2.4 μm) of other surveys. This portion of the spectrum offers deep mass sensitivity, especially around nearby adolescent (~0.1-1 Gyr) stars. LEECH’s contrast is competitive with other extreme adaptive optics systems, while providing an alternative survey strategy. Additionally, LEECH is characterizing known exoplanetary systems with observations from 3-5μm in preparation for JWST.
Z CMa is a young binary system consisting of an Herbig primary and a FU Ori companion. Both components
seem to be surrounded by active accretion disks and a jet was associated to the Herbig B0. In Nov. 2008,
K. Grankin discovered that Z CMa was exhibiting an outburst with an amplitude larger than any photometric
variations recorded in the last 25 years. To study the innermost regions in which the outburst occurs and
understand its origin, we have observed both binary components with AMBER/VLTI across the Br
emission
line in Dec. 2009 in medium and high spectral resolution modes. Our observations show that the Herbig Be,
responsible for the increase of luminosity, also produces a strong Br
emission, and they allow us to disentangle
from various origins by locating the emission at each velocities through the line. Considering a model of a
Keplerian disk alone fails at reproducing the asymmetric spectro-astrometric measurements, suggesting a major
contribution from an outflow.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.